Surfaces made of solid surface material

Individually manufactured for the highest demands on function, design and durability

Worktops, fronts and wall cladding made of solid surface materials combine functionality with precise design. Our surface solutions are used in kitchens, laboratories, clinics, catering areas and shopfitting. Each panel is manufactured according to individual specifications - with freely selectable edges, finishes and installation types. Right from the planning phase, we support you with technical advice and many years of experience in order to achieve tailor-made results of the highest quality.

Follow the steps for a customized solid surface

Selection of the area type

Choose whether the surface is manufactured as a pure 12 mm solid surface panel or with a wood-based material support.
Both variants are available in any length, width and shape - even in oversizes.

Hasenkopf_Flaechen_Abdeckungen_Flaeche_12mm_0

Surface 12 mm without carrier plate

Solid surface panel, 12 mm
with desired edge design, e.g. radius or chamfer
any size possible
also in excess lengths or widths

Surface 12 mm with carrier plate

Solid surface panel, 12mm
bonded with wood-based material
with desired edge design
Radius or bevel according to customer requirements

Edge shapes

The edges are manufactured precisely to specification - optionally with a radius, chamfer or special profile.
This creates a harmonious combination of function and design.

Normal edge

Hasenkopf_flaechen_kanten_schwallrand_1_UC

Surge edge normal

Hasenkopf_flaechen_kanten_schwallrand_2_UC

Surge edge laboratory

Full round edge

Angled edge

Aprons

Hasenkopf_Flaechen_Abdeckungen_corian_belegung_0

Solid surface material on the underside

Special edge

Terminations and edge shapes

The design of the edging determines the effect and function of the surface.
All variants are individually made to measure and can be combined with different edge profiles.

Hasenkopf_arbeitsflaechen_ecken_schraeg_UC

End sloping

The bevel is manufactured according to the customer's specifications, all edge designs are possible.

End rounding with radius

The rounding is manufactured according to the customer's specifications. Standard with normal edge. Surge edge, full round or angled edge according to customer requirements.

Rounding with arch

The sheet is produced according to the customer's specifications. Standard with normal edge. Surge edge, full round or angled edge according to customer requirements.

Wall finishes

Choose from different upstand variants - butt-jointed, with coving or as a complete niche rear wall.
All edges are individually made to measure and neatly glued.

Hasenkopf_arbeitsflaechen_wandabschluss_aufgesetzt_UC

Backsplash butt-jointed

Stippled and firmly glued, 12 mm thick, standard height up to 50 mm, special heights on request. The top edge is finished with a radius or chamfer, individually according to customer specifications.

Hasenkopf_arbeitsflaechen_wandabschluss_hohlkehle_2_UC

6 mm upstand with chamfer

Cove design with a 5 mm inner radius, firmly bonded and 6 mm thick. Standard height up to 50 mm. The upper edge is finished with a radius or chamfer, individually according to customer specifications.

Hasenkopf_arbeitsflaechen_wandabschluss_hohlkehle_1_UC

Backsplash 12 mm with chamfer

Groove design with a 5 mm or 9 mm inner radius, firmly bonded and 12 mm thick. Standard height up to 50 mm. The top edge is finished with a radius or chamfer, individually according to customer specifications.

Hasenkopf_Wandabschluesse_Individualizations_Aufkantung_Nischenrueckwand

Backsplash niche rear wall

Horizontal or vertical connecting joint with tongue and groove, supplied loose for gluing on site, with V-bevel on customer request, jointless up to 3648 mm x 750 mm (excess widths possible), if visible, the upper edge can be finished individually according to customer requirements.

Installation types

Various installation variants are available depending on requirements - seamlessly integrated or for on-site sinks and washbasins.

Seamless substructure for sink or washbasin

Hasenkopf_Einbauarten_Spuelen_Ausschnitt_Bauseitige_Spuelen

Cut-out for on-site support sink

Hasenkopf_installation_types_pipes_substructure_on-site_pipes

Cut-out for on-site undermount sink

Hasenkopf_installation_types_sink_installation_flat_built-in

Cut-out for flush-mounted sink provided by customer

Cut-outs & milling

Hasenkopf_arbeitflaechen_ausschnitte_bohrungen_UC

Drill holes

Hasenkopf_arbeitsflaechen_ausschnitte_herdmulden_UC

Hearth recesses

Ventilation slots

Hasenkopf_working_surfaces_cutouts_storage_UC

Cooking pot racks

Hasenkopf_arbeitsflaechen_abtropfrillen_UC

Drip grooves

Hasenkopf_arbeitflaechen_ausschnitte_tiefschliff_1_UC

Deep grinding, tapered

Deep cut set off

Finished! You created an individual configured solid surface.

Enquire now and make your individual work surface a reality!

Individual solution

Still looking for the right product?

No problem - at Hasenkopf there are no limits to your creativity. Whether unusual special shapes, customized dimensions or individual designs, we make your visions a reality.

Contact & Request

Personal. Competent.

Always at your service.

Whether it's individual customization, technical details or support during the planning phase - we are happy to assist you. Our team provides personal consultation and supports you to find the right solution for your project.

T +49 8677 9847 0
info@hasenkopf.de